| |
SATA Adapters
SATA Cards
SATA Cables
SATA Converters
SATA Enclosures
SATA Removable Trays
SATA Mobile Racks
|
|
Serial ATA selectable Bi-Direction converter for serial and parallel ATA translation. Convert from SATA to IDE or IDE to SATA giving you more flexibility and functionality in a converter.
Serial ATA front view shows the IDE to SATA or Serial ATA to IDE switch.
|
Rear view showing IDE connector of the SATA connector.
|
USBG-300CSP is a selectable bi-direction converter for serial ATA and parallel ATA translation. It includes the Serial ATA PHY, Link, Transport, and Parallel ATA (application layer) controller. The SATA physical, link, and transport layers are compliant to Serial ATA 1.0 CSP300 converter supports a 1.5GHz data rate.
The application layer supports both the ATA register command set and PACKET command set, which could drive both Hard Disk Drive and ATAPI Optical Storage such as CR-ROM, CD-RW, DVD-ROM, DVD-RW, etc. The Serial ATA and the Parallel ATA application layer support both host and device operation and can be configured through a single pin. |
SATA bi-direction converter for serial and parallel ATA translation General Features:
- Power LED Indicator
- Easy install & No driver Needed
- Serial ATA 1.0 Specification compliant Automatic Serial ATA 1.5 Gbps speed negotiation
- ATA / ATAPI PIO mode 0 to 4 ATA / ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133, and 150MB/s.
- ATA / ATAPI LBA48 addressing mode associated with 2-byte sector count Support SATA hot-plug
- Provide specified OOB signal detection and transmission Support Spread Spectrum Clocking to reduce EMI
- Support Partial/Slumber power management Provide adjustable TX signal amplitude and pre-emphasis level
|
|
|
