| |
SATA Adapters
SATA Cards
SATA Cables
SATA Converters
SATA Enclosures
SATA Removable Trays
SATA Mobile Racks
|
|
USB2.0 to serial ATA translation.
Serial ATA PHY, Link, Transport. The Serial ATA physical, link, and transport layers are compliant to
Serial ATA 1.0 ,The AUS100 converter supports a SATA 1.5GHz data rate & USB2.0 480MHz data rate .
The application layer supports both the ATA register command set and PACKET command set, which could drive
SATA Hard Disk. THIS ITEM IS NOT FOR A MAC OS.
USB 2.0 Adapter to any Native SATA 3.5'' Drive from 80GB up to 500GB. Compatible with Windows ME/2000/XP/2003. Not for MAC!
Adapter plugs directly to your USB 2.0 port on a windows based computer and provides one SATA port (with short cable) to connect directly into your SATA 3.5'' HDD. Uses NEC and Jmicron Chip for Conversion. Real Life Test Results show a 12.9 GB file folder with 237 Files transfered in less than 10 minutes. Tested with WD/Maxtor/Seagate/Hitachi SATA drives.
Uses CHIPSET:NEC-720133, Jmicron-JM20330B2
JMICRON Chip |
NEC Chip |
The USB 2.0 to SATA Bridge Cable package includes (1) 2ft SATA Cable - (1) Power Adapter cable with SATA connector - (1) Driver Disk - (1) USB 2.0 to SATA bridge Cable. |
USB 2.0 to SATA bridge cable converter for serial ATA drives
- Power LED Indicator
- Easy install & No driver Needed
- USB port powered, no need for external power. Only needs less than 1 W of power to operate.
- Support Win-98se,Win-98me need driver
- Support Win-2000,Win-xp free driver
- Max speed (Read + Write) : 52M Byte
- USB2.0 Specification compliant USB2.0 NEC newest chipset install
- Max speed (Read + Write) : 52M Byte
- Automatic Serial ATA 1.5 Gbps speed negotiation
- Support USB2.0 plug & play and Serial ATA hot plug
- Ultra low power consumption Work for both AC and DC couple between the transmitter and the receiver
- Provide specified OOB signal detection and transmission Support Spread Spectrum Clocking to reduce EMI
- Support Partial/Slumber power management Provide adjustable TX signal amplitude and pre-emphasis level
- SATA Disk Slave support Speed :Win-98 .....Read >17 Mbyte , Write >14 Mbyte
- Speed : Win-2000,xp .Read >27 Mbyte , Write >25 Mbyte
|
|
|
